Sensor P

Flanged Remote Sensor

Sensor of the electromagnetic flowmeter FLOMAG as flanged version. This version is the most used for general purposes. It is manufactured in dimensions from DN15 up to DN1200 for pressure rates from PN6 up to PN40. Lining is manufactured from soft rubber (MG), hard rubber (TG), special hard rubber (NG), PTFE (T). Measuring electrodes are manufactured from stainless steel (Ss) AISI 316 Ti, Hastelloy C276 (Ha), Titanium (Ti), Platinum (Pt). The lining and the electrodes are chosen according to the chemical composition and the temperature of the measured medium. Please, consult the concrete materials with the manufacturer.

Transmitter can be integral part of the sensor – compact version or it is connected with the sensor with a cable – remote version.

Technical parameters

Nominal diameter	DN15..DN1200
Nominal pressure	PN6, PN10, PN16, PN25, PN40, 150lb, 300lb, 600lb
Flanges	DIN (PDIN), ANSI (PANSI), ASA (PASA)
Electrode material	Stainless steel AISI 316 Ti, Hastelloy C-276, Ti, Pt
Lining	Hard rubber (TG) Soft rubber (MG), Special rubber (NG), PTFE (T)
Liquid temperature	0 - 80°C (TG, MG), 0 - 90°C (NG), 0 - 150°C (T)
Protection	IP67, IP68
Installation	Compact or remote version

Installation lengths

In the following table are stated the standard installation lengths of the sensors for all manufactured dimensions and linings. On special request, we can manufacture sensors with other installation length according to the customer’s requirements.

DN	ISO 13359, EN 14154	Optional
15, 20	200	138
25 - 80	200	215
100	250	215
125	250	305
150	300	305
200	350	380
250	400	380
300	500	515
350	550	515
400 - 600	600	615
700	700	715
800	800	815
900	900	815
1000	1000	1015
1200	1200	1015

Range limits

Selected sensor range has to be in the flow velocity interval 0,1 up to 12 m/s. Volume flow rate limits for the single dimensions are shown in the table. It is suitable to choose the operational sensor range between 0,5 and 5 m/s.

DN		Flow rate l/s		Flow rate m³/h
mm	inch	Q_min	Q_max	Q_min	Q_max
15	1/2′	0.0176	2.120	0.0636	7.634
20	3/4′	0.0314	3.769	0.1130	13.57
25	1′	0.0490	5.890	0.1767	21.20
32	1 1/4′	0.0804	9.650	0.2895	34.74
40	1 1/2′	0.1256	15.07	0.4523	54.28
50	2′	0.1963	23.56	0.7068	84.82
65	2 1/2′	0.3318	39.81	1.194	143.3
80	3′	0.5026	60.31	1.809	217.1
100	4′	0.7853	94.24	2.827	339.2
125	5′	1.227	147.2	4.417	530.1
150	6′	1.767	212.0	6.361	763.4
200	8′	3.141	376.9	11.30	1357
250	10′	4.908	589.0	17.67	2120
300	12′	7.068	848.2	25.44	3053
350	14′	9.621	1154	34.63	4156
400	16′	12.56	1507	45.23	5428
450	18′	15.90	1908	57.25	6870
500	20′	19.63	2356	70.68	8482
600	24′	28.27	3392	101.7	12214
700	28′	38.48	4618	138.5	16625
800	32′	50.26	6031	180.9	21714
900	39′	63.61	7634	229.0	27482
1000	40′	78.53	92424	282.7	33929
1200	48′	113.0	13571	407.1	48858

Attached files

FLOMAG 3000 Datasheet EN [504 kB]
FLOMAG3000 Manual EN [1275 kB]